Fire
Extinguishers (borrowed and modified with permission
from the Phoenix (AZ.) Fire Department)

Everybody has seen fire extinguishers. Many people have them in their car,
at home or at work. But not everyone understands them or knows how to work
them. The Howlett Hill Fire Department would like for you to have a working
knowledge of fire extinguishers. It could save your life or those whom you
love.
Fire extinguishers are not designed to fight a large or spreading fire.
Even against small fires, they are useful only under the right conditions.
An extinguisher must be large enough for the fire at hand. It must be
available and in working order, fully charged. The operator should be familiar
with the extinguisher so it won't be necessary to read directions during an
emergency.
Buy
Extinguishers Carefully
Types of
Extinguishers
Using a Fire
Extinguisher
When to Fight a
Fire

A fire extinguisher should be "listed" and "labeled" by an independent
testing laboratory such as FM (Factory Mutual) or UL (Underwriters
Laboratory).
The higher the rating number on an A or B fire extinguisher, the more fire
it can put out, but high-rated units are often the heavier models. Make sure
you can hold and operate the extinguisher you are buying.
Remember that extinguishers need care and must be recharged after every
use. Ask the dealer about the extinguisher and how it should be serviced and
inspected. A partially used unit might as well be empty.
You may need more than one extinguisher in your home. For example, you may
want an extinguisher in the kitchen as well as one in the garage or workshop.
Each extinguisher should be installed in plain view near an escape route and
away from potential fire hazards such as heating appliances.
Return to top of
Fire Extinguishers

Fire extinguishers are labeled according to the type of fire on which they
may be used. Fires involving wood or cloth, flammable liquids, electrical, or
metal sources react differently to extinguishers. Using one type of
extinguisher on the wrong type of fire could be dangerous and make matters
even worse.
Traditionally, the labels A, B, C or D have been used to indicate the type
of fire on which an extinguisher is to be used.
Type A Label
The Type A label is in a triangle on the extinguisher.
This extinguisher is used for ordinary combustibles such as cloth, wood,
rubber and many plastics. These types of fire usually leave ashes after they
burn. Type A extinguishers for Ashes.
Type B Label
The Type B label is in a square on the extinguisher.
This extinguisher is used for flammable liquid fires such as oil, gasoline,
paints, lacquers, grease, and solvents. These substances often come in
barrels. Type B extinguishers for Barrels.
Type C Label
The Type C label is in a circle on the extinguisher.
This extinguisher is used for electrical fires such as in wiring, fuse boxes,
energized electrical equipment and other electrical sources. Electricity
travels in currents. Type C extinguishers for Currents.
Type D Label
The Type D label is in a star on the extinguisher.
This extinguisher is used for metal fires such as magnesium, titanium and
sodium. These types of fire are very dangerous and seldom handled by the
general public. Type D for Don't get involved.
Pictograms
Recently, pictograms have come into use on fire
extinguishers. These picture the type of fire on which an extinguisher is to
be used. For instance, a Type A extinguisher has a pictogram showing burning
wood and a Type C extinguisher has a pictogram showing an electrical cord and
outlet. These pictograms are also used to show what not to use. For example, a
Type A extinguisher will show a pictogram of an electrical cord and outlet
with a big slash through it. In other words, don't use it on an electrical
fire.
Number Rating
Fire extinguishers also have a number rating. For
Type A fires, a 1 would stand for 1 1/4 gallons of water, a 2 would represent
2 1/2 gallons, 3 would be 3 3/4 gallons of water, etc. For Type B and Type C
fire, the number represents square feet. For example, 2 would be two square
feet, 5 is five square feet, etc.
Fire extinguishers can also be made to extinguish more than one type of
fire. For example, you might have an extinguisher with a label that reads
2A5B. This would mean this extinguisher is good for Type A fires with a 2 1/2
gallon equivalence and it is also good for Type B fires with a 5 square feet
equivalency. A good extinguisher to have in each residential kitchen is a
2A10BC fire extinguisher. You might also get a Type A for the living room and
bedrooms and an ABC for the basement and garage.
Return to top of
Fire Extinguishers

There is a simple acronym to remember to operate most fire extinguishers -
PASS.
PASS stands for Pull, Aim, Squeeze and Sweep.
Pull the pin at the top of the cylinder. Some units require the
releasing of a lock latch or pressing a puncture lever.
Aim the nozzle at the base of the fire.
Squeeze or press the handle.
Sweep the contents from side to side at the base of the fire until
it goes out.
Shut off the extinguisher and then watch carefully for a rekindling of the
fire.
Return to top of
Fire Extinguishers

You should fight a fire with a fire extinguisher
only when all the
following are true: